Kia Soul: Canister Close Valve (CCV). Repair procedures
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Canister Close Valve (CCV). Repair procedures
Inspection
1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the CCV connector.
|
3. |
Measure resistance between the CCV terminal 1 and 2.
|
4. |
Check that the resistance is within the specification.
|
5. |
Disconnect the vapor hose connected with the canister from the
CCV.
|
6. |
Connect a vacuum pump to the nipple.
|
7. |
Ground the CCV control line and apply battery voltage to the CCV
power supply line.
|
8. |
Apply vacuum and check the valve operation.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Lift the vehicle.
|
3. |
Disconnect the canister close valve connector (A).
|
4. |
Disconnect the ventilation hose (B) from the canister close valve.
|
5. |
Remove the canister close valve (C) after removing the bolts.
|
Installation
|
1. |
Install in the reverse order of removal.
|
Canister Close Valve (CCV). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...See also:
Control System Composition
...
Intake Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
Climate control air filter Cleaning
1.
Remove the climate control air filter.
2.
Check that the climate control air filter is not excessively dirty.
...