Kia Soul: Brake Pedal. Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
| 3. |
Disconnect the stop lamp switch connector (A).
|
| 4. |
Remove the stop lamp switch.
(Refer to Brake System - "Stop lamp switch")
|
| 5. |
Remove the brake pedal member mounting bolt (A).
|
| 6. |
Remove the snap pin (A) and clevis pin (B).
|
| 7. |
Remove the brake pedal member assembly mounting nuts and then
remove the brake pedal assembly.
|
Brake Pedal. Components
1. Cowl bracket
2. Brake pedal member assembly
3. Stop lamp switch
4. Return spring
5. Bolt
6. Brake pedal arm
7. Brake pedal pad
...
Brake Pedal. Inspection
1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal retur ...
See also:
Compressor Inspection
1.
Check the plated parts of the limiter & hub assembly (A) for color
changes, peeling or other damage. If there is damage, replace the assembly.
2 ...
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistan ...
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position for ...