Kia Soul: Brake pedal Inspection
Check that the brake pedal operates smoothly.
Brake Pedal Height and Stop Lamp Switch clearance Adjustment
1. |
Disconnect the stop lamp switch connector (A).
|
2. |
Adjust the brake pedal height (A) as illustration below.
|
3. |
Adjust the stop lamp switch clearance (B).
|
4. |
Connect the stop lamp switch connector
|
Brake lines, hoses and connections Inspection
Visually check for proper installation, chafing, cracks, deterioration and any leakage Replace any deteriorated or damaged parts immediately. ...Chassis/Body nuts & bolts Inspection
1. Tighten bolts and nuts on chassis and body. (1) Where necessary, tighten all the parts of the chassis. A. ...See also:
ESC Operation Mode
1.
STEP 1
The ESC analyzes the intention of the driver.
2.
STEP 2
It analyzes the movement of the ESC vehicle.
...
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
Air can be directed to the floor, dashboard outlets, or windshield. Five symbols
are used to rep ...
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your
sunroof system as follows:
1.Turn the ignition switch to the ON position.
2.According to the position of the sunroof ...