Kia Soul: Brake Line. Removal
1. |
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
|
2. |
Remove the brake fluid from the master cylinder reservior with
a syringe.
|
3. |
Remove the wheel & tire.
|
4. |
Remove the brake hose mounting bracket bolt (A).
|
5. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear
|
6. |
Remove the brake hose clip (A).
|
7. |
Disconnect the brake hose from the brake caliper by loosening
the bolt (A).
Front
Rear
|
Brake Line. Components
When installing brake hose, be sure to comply with the torque specification to prevent twisted hose. ...Brake Line. Inspection
1. Check the brake tubes for cracks, crimps and corrosion. 2. Check the brake hoses for cracks, damage and fluid leakage. 3 ...See also:
26 Brake Control Solenoid Valve(26/B_VFS). Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...
A Pillar Garnish Replacement
•
Put on gloves to protect your hands.
...
Canister Installation
1.
Install in the reverse order of removal.
Canister mounting bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
...