•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the caps (A) and screws, then remove the assist handle
(B).
|
2. |
Install in the reverse order of removal.
|
1. Roof Trim Assembly
...
See also:
Brake/clutch (if equipped) fluid
Check the brake fluid level in the brake fluid reservoir. The level should be
between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 ...
Highway driving
Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures
will result in overheating and possible failure of the tires.
Avoid using worn or damaged tires which may r ...
Heated Steering wheel. Inspection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Brown / Black) - 10kΩ (9kΩ ~ 11kΩ), 25°C
...