Kia Soul: Alternator Removal - Charging System - Engine Electrical SystemKia Soul: Alternator Removal

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Removal

1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).

3.
Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension.

4.
Remove the drive belt (A).

5.
Remove the alternator brace assembly (A) after loosening the mounting upper bolt (B) and brace mounting bolts (C).

6.
Remove the alternator mounting low bolt (A), and then remove the alternator.

    Alternator Circuit Diagram
       • COM signal - When controlling the voltage generated, the ECM sends the target ...

    Alternator Installation
    1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine Mechanical ...

    See also:

    Fuel requirements
    Your new vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performance ...

    ENGINE START/STOP button position
    OFF Not illuminated • With manual transaxle To turn off the engine, stop the vehicle then press the ENGINE START/STOP button with the ENGINE START/STOP button ON. • With automatic transaxl ...

    Rear Pillar Trim Replacement
       • Put on gloves to protect your hands. ...