Kia Soul: A/C Pressure Transducer Replacement - Air conditioning System - Heating,Ventilation And Air ConditioningKia Soul: A/C Pressure Transducer Replacement

Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / A/C Pressure Transducer Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/charging station.
3.
Disconnect the A/C pressure transducer connector (A).
4.
Remove the A/C pressure transducer (B).
Tightening torque :
10 ~ 12 N.m (1.02 ~ 1.22 kgf.m, 7.4 ~ 8.8 lb-ft)

  
Be careful not to bend the liquid & suction pipe.
5.
Install in the reverse order of removal.
  
When installing, replace it with a new O-ring (A).

    A/C Pressure Transducer Inspection
    1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the volt ...

    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...

    See also:

    Cluster Ionizer (FATC only) Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") ...

    SCAN
    Press the key Shortly pressing the key (under 0.8 seconds): Previews each broadcast for 10 seconds each ❈ Press the key again to continue listening to the current frequency ...

    Alternator Circuit Diagram
       • COM signal - When controlling the voltage generated, the ECM sends the target ...