Kia Soul: 26 Brake Control Solenoid Valve(26/B_VFS). Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS). Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
26 Brake Control Solenoid Valve(26/B_VFS). Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance bet ...Line Pressure Control Solenoid Valve. Description
line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...See also:
Passenger Airbag (PAB) Module. Description
Passenger Airbag (PAB) module is located in the passenger crash pad. This
PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending
of crash speed or the tightening ...
Care of disc
If the temperature inside the car is too high, open the car windows for
ventilation before using your car audio.
It is illegal to copy and use MP3/WMA files without permission. Use CDs
that ...
Vacuum crankcase ventilation hoses (if equipped)
Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard
and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate
deterioration.
Particular at ...