Kia Soul: Vapor hose and fuel filler cap Inspection - Power Train - MaintenanceKia Soul: Vapor hose and fuel filler cap Inspection

Kia Soul 2014-2019 PS Service Manual / Maintenance / Power Train / Vapor hose and fuel filler cap Inspection

Vapor hose
1.
Check all the clamps for tightness and the connections for leakage.
2.
Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation.
Fuel filler cap
1.
Check that the filler-neck assembly mounting bolts (A) are loose.

2.
Visually check that the fuel tank cap assembly and gasket (A) are not deformed or damaged.

    Valve Clearance Adjustment
       Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20В°C) and cylinder head is ...

    Chassis
    ...

    See also:

    Transmitter precautions
    NOTICE The transmitter will not work if any of the following occurs: The ignition key is in the ignition switch. You exceed the operating distance limit (about 10 m [30 feet]). The battery in ...

    Schematic Diagrams
    Schematic Diagrams MDPS Circuit Diagram Harness Connector ConnectorPin No.Pin NameBattery1Battery +2Battery -Vehicle signal1Ignition2N.C.3N.C.4N.C.5N.C.6N.C.7CAN_High8CAN_Low ...

    Relay Box (Passenger Compartment) Repair procedures
    Fuse Inspection 1. Be sure that there are no loose fuse holders and that the fuses are held securely. 2. Is the fuse capacity correct for each circuit? 3. Are there any blown fuses? If a ...