Kia Soul: Valve Body. Installation - Hydraulic System - Automatic Transaxle SystemKia Soul: Valve Body. Installation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body. Installation

1.
Install in the reverse order of removal.
  
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
Use new valve body gasket (A).

    Valve Body. Removal
    1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the drain plug (A) and dr ...

    See also:

    Tire traction
    Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. Slow down when ...

    Purge Control Solenoid Valve (PCSV). Description and Operation
    Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when ...

    Mode selection
    The mode selection button controls the direction of the air flow through the ventilation system. Refer to the illustration in the “Manual climate control system”. The air flow outlet port is ...