Kia Soul: This device complies with Part 15 of the FCC rules
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
✽ NOTICE
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If the keyless entry system is inoperative due to changes or modifications not expressly approved by the party responsible for compliance, it will not be covered by your manufacturer’s vehicle warranty.
Transmitter precautions
• The transmitter will not work if any of the following occurs: - The ignition key is in the ignition switch. - You exceed the operating distance limit (about 90 feet [30 m]). - The battery in th ...Battery replacement
A transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gently ...See also:
Heated Oxygen Sensor (HO2S). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between th ...
SS-A Solenoid Valve(ON/OFF). Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...
Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary.
Drive belts should be checked periodically for proper tension and adjusted as
nece ...