Kia Soul: System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if equipped)
on.
• If the windshield fogs up, set the mode to the
or
position.
Operation Tips
- To keep dust or unpleasant fumes from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the control to the fresh air position when the irritation has passed to keep fresh air in the vehicle. This will help keep the driver alert and comfortable.
- Air for the heating/cooling system is drawn in through the grilles just ahead of the windshield. Care should be taken that these are not blocked by leaves, snow, ice or other obstructions.
- To prevent interior fog on the windshield, set the air intake control to the fresh air position and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to desired temperature.
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate). Press the button again to turn the air conditioning system off. ...
Air conditioning
All Kia Air Conditioning Systems are filled with environmentally friendly R-134a
refrigerant which does not damage the ozone layer.
1. Start the engine. Press the air conditioning button.
2. Set t ...
See also:
Automatic transaxle Replacement
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the drain plug (A) and dr ...
Transaxle Oil Temperature Sensor. Description
Transaxle oil temperature sensor monitors the automatic transaxle fluid's
temperature and conveys the readings to TCM. It is an NTC (Negative Thermal
Coefficient) sensor whose resistance ...
Rear Center Seat Belt Retractor Replacement
•
When installing the belt, make sure not to damage the
retractor.
...