Kia Soul: SS-B Solenoid Valve(ON/OFF). Installation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: SS-B Solenoid Valve(ON/OFF). Installation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF). Installation

1.
Installation is the reverse of removal.
  
•
When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.

•
Replace the gasket (A) before reinstalling the valve body cover.
•
Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")

•
Perform Transaxle Control Module(TCM) learning after replacing the solenoid valve to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
    SS-B Solenoid Valve(ON/OFF). Removal
    1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the drain plug (A) and dr ...

    Inhibitor Switch. Description
    Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...

    See also:

    TPMS Sensor Mode of Operation
    ASIC Mode 1. Factory Mode The factory mode is the mode that allows the TPM sensor to transmit RF Frames and sample LF more often in the HKMC factory. T ...

    Heater & A/C Control Unit (FATC) Self Diagnosis
    1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel flickers three times every 0.5 second, ...

    In-car Sensor (FATC only)
    The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the r ...