Kia Soul: Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
- Care must be taken when using the hazard warning flasher while the vehicle is being towed.
See also:
Additional safety precautions
Never let passengers ride in the cargo area or on top of a folded-down
back seat. All occupants should sit upright, fully back in their seats with
their seat belts on and their feet on the fl ...
Hazard Lamp Switch Installation
1.
Install the hazard switch in the center airvent assembly.
2.
Connect the connector and install the center airvent assembly.
...
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...