Kia Soul: Removal - Clutch Pedal - Clutch SystemKia Soul: Removal

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Pedal / Removal

1.
Disconnect the battery (-) cable.
2.
Disconnect the ignition lock switch and clutch switch connector (A).

3.
Separate the push rod (C) after remove the pin (A) and washer (B).

4.
Remove the clutch pedal mounting nuts (A).

Tightening torque :
(A) 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

    Components
    1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube ...

    Installation
    1. Install in the reverse order of removal. ...

    See also:

    Inspection (With GDS)
    1. Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. ...

    Power Window Motor Inspection
    Front Power Window Motor 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer ...

    Valve Clearance Inspection And Adjustment
       Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20В°C) and cylinder head is ...