Kia Soul: Rear Oil Seal Removal
1. |
Remove the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
(Refer to Automatic Transaxle System - "Automatic Transaxle")
|
2. |
MT : Remove the flywheel.
(Refet to Cylinder Block - "Flywheel")
|
3. |
AT : Remove the drive plate.
(Refet to Cylinder Block - "Drive Plate")
|
4. |
Remove the rear oil seal(A).
|
Rear Oil Seal Components
1. Rear oil seal ...Rear Oil Seal Installation
1. Install the rear oil seal. (1) Apply engine oil to a new oil seal lip. (2) Using th ...See also:
Condition of ISG system operation
The ISG system will operate under the following condition:
- The driver’s seat belt is fastened.
- The driver’s door and engine hood are closed.
- The brake vaccum pressure is adequate.
- The ...
Engine Room Under Cover Removal and Installation
Engine Room Under Cover
1.
Remove the engine room under cover (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft ...
Customer Complaint Analysis Check Sheet
Troubleshooting (Flow chart type)
There are six areas where a problem can occur: wiring harness, the
radio, the USB/iPod, and speaker. Troubleshooting enables you to confine ...