Kia Soul: Rear Disc Brake. Replacement - Brake System - Brake SystemKia Soul: Rear Disc Brake. Replacement

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Rear Disc Brake. Replacement

Rear brake pads
1.
Remove the front wheel & tire.
2.
Loosen the guide rod bolt (B) and the remove the rear caliper body (A).

Tightening torque :
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

3.
Replace pad retainers (C) and brake pads (B) in the caliper carrier (A).

4.
Rotate the caliper piston and push the direction of the arrow.

5.
Place the caliper body (A) on the caliper carrier and tighten the guide rod bolt (B).

Tightening torque :
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

  
Assemble the caliper body so that the piston groove (A) is in-line with the pad center lobe (B).

* Make sure that the piston and pad are tightly attached.
6.
Install the front wheel & tire.

Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

    Rear Disc Brake. Removal
    Brake caliper assembly 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...

    Rear Disc Brake. Inspection
    Rear brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

    See also:

    Tire specification and pressure label
    The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures recommende ...

    Component Location
    1. Driver power window main switch 2. BCM (Body Control Module) 3. Door lock switch 4. Front door lock actuator & switch 5. Rear door lock actuator & ...

    Alternator Circuit Diagram
       • COM signal - When controlling the voltage generated, the ECM sends the target ...