Kia Soul: Power Door Mirror Actuator Inspection
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door quadrant cover (A).
|
3. |
Disconnect the power door mirror connector (A) from the harness.
|
4. |
Apply battery voltage to each terminal as shown in the table
and verify that the mirror operates properly.
[Actuator]
Mirror Heater
Turn Signal Lamp
Folding Mirror
|
Power Door Mirror Switch Inspection
1.
Remove the front left door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the power mirror switch co ...
Power Windows
...
See also:
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized Kia dealer to duplicate
the keys easily. Remove the ...
Mode Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode con ...
Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power
Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning directio ...