Kia Soul: Oil Pan Installation - Lubrication System - Engine Mechanical SystemKia Soul: Oil Pan Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Lubrication System / Oil Pan Installation

1.
Install the oil pan.
(1)
Using a razor blade and gasket scraper, remove all the old packing material from the gasket surfaces.
  
Check that the mating surfaces are clean and dry before applying liquid gasket.
(2)
Apply liquid gasket as an even bead, centered between the edges of the mating surface.

Liquid gasket : TB 1217H or LOCTITE 5900H

  
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
Do not install the parts if five minutes or more have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after removing the residue.
After assembly, wait at least 30 minutes before filling the engine with oil.
(3)
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.

Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

2.
Refill engine oil.
    Oil Pan Removal
    1. Remove the under covers. 2. Drain engine oil. 3. Using the SST(09215-3C000) and remove the oil pan (A). ...

    See also:

    Heater & A/C Control Unit (FATC) Self Diagnosis
    1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel flickers three times every 0.5 second, ...

    Certification label
    The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Ve ...

    Temperature control, Max A/C selection
    Temperature control The temperature control knob allows you to control the temperature of the air flowing from the ventilation system. To change the air temperature in the passenger compartment ...