Kia Soul: Muffler Removal and Installation - Intake And Exhaust System - Engine Mechanical SystemKia Soul: Muffler Removal and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Intake And Exhaust System / Muffler Removal and Installation

Front Muffler
1.
Disconnect the rear oxygen sensor connector (A).
2.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.
Install in the reverse order of removal.
  
When installing, replace with new gaskets.
Center Muffler
1.
Remove the center muffler assembly (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

2.
Install in the reverse order of removal.
  
When installing, replace with new gaskets.
Main muffler
1.
Detach the rubber hangers (A) from the rear muffler.
2.
Remove the rear muffler (B).
Tightening torque :
39.2 ~ 58.9 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.
Install in the reverse order of removal.
    Muffler Components
    1. Front muffler 2. Catalytic converter & center muffler assembly 3. Main muffler 4. Gasket 5. Hanger ...

    Lubrication System
    ...

    See also:

    Emergency Fastening Device (EFD). Description
    Emergency Fastening Device (EFD) is deployed with Belt Pretensioner at the same time to pull down the seat belt strongly If it gets into its deploy condition after a collision. It is located ...

    Ignition Coil Installation
    1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

    Description
    Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the ...