Kia Soul: Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior light housing notches and snap the lens into place.
CAUTION
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
License plate light bulb replacement
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by turning it counter clockwise.
4. Install a new bulb in the socket and install the socket to th ...
Appearance care
...
See also:
Auto start
To restart the engine from idle stop mode
Release the brake pedal. or
Move the shift gear to the R (Reverse) position or the sports mode while
depressing the brake pedal.
The engine will s ...
Bluetooth® Wireless Technology(if equipped)
Bluetooth® Wireless Technology
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, lnc. and any use of such marks by Kia is under license.
A Bluetooth® enabled ...
Rear Door Trim Component Location
1. Rear door trim
...