Kia Soul: Installation - Clutch Release Cylinder - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Release Cylinder / Installation

1.
Install in the reverse order of removal.
  
Apply the specified grease to the push rod end.

Specified grease: CASMOLY L9508
Quantity: 0.4 ~ 0.8 g

    Removal
    1. Drain the brake fluid through the bleed plug (A).    • ...

    Adjustment
    Clutch Release Cylinder Air Bleeding Procedure    • Use the specified fluid. Av ...

    See also:

    Repair procedures
    Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedu ...

    BJ Boot Replacement
    1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

    Memory Information
    Displays currently used memory and total system memory. Select [Memory Information]  OK The currently used memory is displayed on the left side while the total system memory is displayed ...