Kia Soul: Inspection
1. |
Remove the cowl top cover.
(Refer to Body - "Cowl Top Cover")
|
2. |
Disconnect the windshield deicer connector.
|
3. |
Check for continuity between the terminals of deicer lines.
|
4. |
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage between the terminals of harness side
deicer connector.
|
Description
Windshield deicer system prevent windshield wiper from freezing in
the winter season. It consists of deicer in the lower part of windshield,
switch and relay. Body control module receives ...
Windshield Deicer Switch Inspection
1.
The windshield deicer switch inputs can be checked using the
GDS.
2.
To check the input value of windshield deicer swit ...
See also:
Charge Door Opener Actuator Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
3.
Remove the charge door opener cover assembly.
(Refer ...
PWM Blower Module Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.
...
Pre-tensioner seat belt
Your vehicle is equipped with pretensioner seatbelts at the front and rear outboard
seating positions.
The purpose of the pre-tensioner is to make sure that the seat belts fit tightly
against t ...