Kia Soul: Idler Removal and Installation - Timing System - Engine Mechanical SystemKia Soul: Idler Removal and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Timing System / Idler Removal and Installation

1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the idler(A).

Tightening torque :
42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
    Idler Components
    1. Idler ...

    Drive Belt Tensioner Components
    1. Drive belt tensioner ...

    See also:

    Wheel Repair procedures
    Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, fin ...

    REAR VIEW MONITOR (RVM) system
    Rear View Monitor system will activate when the back-up light is ON with the ignition switch ON and the shift lever in the R (Reverse) position. This system is a supplemental system that shows be ...

    Temperature Control Actuator Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel" ...