Kia Soul: Hazard Lamp Switch Inspection
1. |
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
It will be able to diagnose defects of hazard lamp switch
with GDS quickly. GDS can operates actuator forcefully, input/output
value monitoring and self diagnosis.
|
2. |
To diagnose the SJB function, select the vehicle model, BCM
and SJB.
|
3. |
To consult the present input/out value of SJB, "Current DATA".
It provides information of SJB input/output conditions.
|
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the connector.
2.
Install the lens after tightening 2 screws.
...
Hazard Lamp Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center airvent assembly (A).
...
See also:
Seat Heater (Non-Air Ventilation) Repair procedures
Inspection
First Row Seat
1.
Check for continuity and measure the resistance between terminals.
Part?ConnectorResistance(В± 10%)Cushion (C)1-24.54 ?Back (B)1-25.16 ?Set (A)1-49.70 ?
Secon ...
Tire pressure monitoring system
(1) Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by ...
Forward Collision-Avoidance Assist (FCA) system (Camera +Radar type)
FCA system is to reduce or to avoid accident risk. It recognizes the distance
from the vehicle ahead, the pedestrian or the cyclist through the sensors (i.e.
radar and camera), and, if necessary, ...