•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
After loosening the mounting screws, then remove the front seat
shield inner cover (A).

|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
1. Front seat shield inner cover
...
1. Front seat back cover
...
See also:
Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual
speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few ...
ETC (Electronic Throttle Control) System. Specifications
Specification
[TPS1]
Item
Opening Percentage
(%)
Output Voltage (V)
[Vref = 5V]
C.T
7 ~ 13
0.35 ~ 0.65
W.O.T
88.6 ~ 94
...
Mode Control Actuator Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control
actuator based on the signal of the A/C control unit. Pressing ...