Kia Soul: Front Seat Assembly Replacement - Front Seat - Body (Interior and Exterior)Kia Soul: Front Seat Assembly Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Assembly Replacement

1.
Loosen the front seat assembly mounting bolts (A).
Tightening torque :
34.3 ~ 53.9N.m (3.5 ~ 5.5kgf.m, 25.3 ~ 39.8lb-ft)
[Front]

[Rear]
2.
Remove the front seat assembly (A).
3.
Disconnect the seat buckle connector (A), seat warmer & power seat connector (B), SAB connector(C), PODS connector (D).
[Driver's]

[Passenger's]
4.
Install in the reverse order of removal.
  
SEAT MOUNTING BOLT INSTALLATION PROCEDURE
•
Set the seat into the most rearward position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.
•
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely.
•
Set the seat into the most rearward position. Check the front mounting bolt completely.
•
Check that the seat operates to and fro smoothy and the locking portion locks properly.
    Front Seat Assembly Component Location
    1. Front seat assembly ...

    Front Seat Shield Outer Cover Component Location
    1. Front seat shield outer cover ...

    See also:

    Emergency tailgate safety release
    Your vehicle is equipped with an emergency tailgate safety release lever located on the bottom of the tailgate. When someone is inadvertently locked in the cargo area, the tailgate can be open ...

    Fuel Tank Air Filter Installation
       • Install the component with the specified torques. • ...

    Transaxle Control Module (TCM). Inspection
    TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...