Kia Soul: Front Hub / Knuckle Inspection
1. |
Check the hub for cracks and the splines for wear.
|
2. |
Check the brake disc for scoring and damage.
|
3. |
Check the knuckle for cracks.
|
4. |
Check the bearing for cracks or damage.
|
Front Hub / Knuckle Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Front Hub / Knuckle Installation
1.
Install in the reverse order of removal.
Use a SST (09581-11000) when ...
See also:
Parking Assist Sensor Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front/rear bumper cover.
(Refer to Body - "Front Bumper Cover")
(Refer to Body - "Rear Bumper Cover")
3.
Disconnect ...
Air Ventilation Seat Control Unit Installation
Cushion Blower
1.
Install the cushion blower.
2.
Install the front seat assembly.
Back Blower
...
Components and Components Location
Component Location Index
Engine Room
[Without Heat Pump]
1. Receiver-drier2. Condensor3. A/C Pressure Transducer (APT)4. Service port (Low pressure)5. Service port (High pressure)6. Sucti ...