Kia Soul: Front Disc Brake. Replacement
Front brake pads
1. |
Remove the front wheel & tire.
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper body (A) up
out of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
4. |
Compress the piston into the caliper body using the SST (09581-11000).
|
5. |
Place the caliper body (A) on the caliper carrier and tighten
the guide rod bolt (B).
|
6. |
Install the front wheel & tire.
|
Front Disc Brake. Removal
Brake caliper assembly
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...
Front Disc Brake. Inspection
Front brake disc thickness check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...
See also:
Circuit Diagram
...
Preset SEEK
Press the
~
key
Briefly pressing the key (under 0.8 seconds): Plays the frequency saved
in the corresponding key.
Pressing and holding the key (over 0.8 seconds): Pressing and h ...
Fan speed control
The ignition switch must be in the ON position for fan operation.
The fan speed knob allows you to control the fan speed of the air flow from the
ventilation system. To change the fan speed, turn ...