Kia Soul: External Amplifier Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Loosen loosening the mounting nuts.
|
3. |
Remove the amplifier (B) after disconnecting the amplifier connectors
(A).
|
External Amplifier Components
Connector Pin Information
No.
Connector A (12Pin)
Connector B (22Pin)
1
Front door left (+)
Front center (+)
2
Front door ri ...
External Amplifier Installation
1.
Install the external amplifier after connecting the connector.
...
See also:
GAWR (Gross axle weight rating)
This is the maximum allowable weight that can be carried by a single axle (front
or rear). These numbers are shown on the certification label.
The total load on each axle must never exceed its GAWR ...
35R Clutch Control Solenoid Valve(35R/C_VFS). Specifications
Direct control VFS[35R/C]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)
Current value(mA)
...
High Voltage Battery Heater Fuse Description and Operation
High Voltage Battery Heater Fuse
It is connected to battery heater relay switch and it cuts off the circuit in case of overcurrent.
It is installed in the Power Relay Assembly (PRA).Operation
...