Kia Soul: Engine Room Under Cover Removal and Installation - Engine And Transmission Assembly - Engine Mechanical SystemKia Soul: Engine Room Under Cover Removal and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Engine And Transmission Assembly / Engine Room Under Cover Removal and Installation

Engine Room Under Cover
1.
Remove the engine room under cover (A).

Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

55555

2.
Install in the reverse order of removal.
Engine Room Side Cover
1.
Remove the engine room side covers (A).

Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

[RH]

[LH]

2.
Install in the reverse order of removal.
    Engine Room Under Cover Components
    1. Engine room side cover (RH) 2. Engine room side cover (LH) 3. Engine room under cover ...

    Engine Mounting Components
    1. Transaxle mounting bracket 2. Roll road bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

    See also:

    Front Wheel Speed Sensor. Removal
    1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    Driving in flooded areas
    Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...

    Spark Plug Inspection
    [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. ...