Kia Soul: Crankshaft Position Sensor (CKPS). Description and Operation
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS). Description and Operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder frame and generates alternating current
by magnetic flux field which is made by the sensor and the target wheel when
the engine rotates. The target wheel consists of 58 slots and 2 missing slots
on 360 CA (Crank Angle).
Engine Coolant Temperature Sensor (ECTS). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immers ...Crankshaft Position Sensor (CKPS). Specifications
Specification Item Specification Coil Resistance (Ω) 774 ~ 946 [20°C (68°F)] ...See also:
Inner panel fuse replacement
1. Turn the ignition switch and all other switches off.
2. Open the fuse panel cover.
WARNING
Be careful not to hurt your hands when a fuse is replaced due to narrow space.
3. Pull the sus ...
Check battery and cables
Winter puts additional burdens on the battery system. Visually inspect the battery
and cables as described in section 7. The level of charge in your battery can be
checked by an authorized Kia dea ...
Fuel gauge
The fuel gauge indicates the approximate amount of fuel remaining in the fuel
tank. The fuel tank capacity is given in section 8. The fuel gauge is supplemented
by a low fuel warning light, whic ...