Kia Soul: Components and Components Location - Rear Seat - Body (Interior and Exterior)Kia Soul: Components and Components Location

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Rear Seat / Components and Components Location

Components (1)

(Rear Seat Back Assembly)

1. Rear seat headrest [LH]
2. Rear seat headrest [Center]
3. Rear seat headrest [RH]
4. Rear seat headrest guide [RH]
5. Rear seat headrest guide [Center]
6. Rear seat headrest guide [LH]
7. Rear seat folding bezel [LH]
8. Rear seat folding lever [LH]
9. Tether anchor ganish [LH]
10. Rear seat latch assembly [LH]
11. Rear seat latch rod support bracket [LH]
12. Rear seat back bush hinge [LH]
13. Rear seat lower side bracket [LH]
14. Rear seat back striker [LH]
15. Rear seat back cover [LH]
16. Rear seat back pad [LH]
17. Tether anchor ganish [RH]
18. Rear seat back structure [LH]
19. Center hinge cover
20. Rear back armrest
21. Rear seat folding bezel [RH]
22. Rear seat folding lever [RH]
23. Rear seat latch rod support bracket [RH]
24. Rear seat latch assembly [RH]
25. Rear seat back striker [RH]
26. Rear seat back structure [RH]
27. Rear seat lower side bracket [RH]
28. Rear seat back bush hinge [RH]
29. Rear center seat belt retractor
30. Rear seat lower side bracket [Center]
31. Rear seat back cover [RH]
32. Rear seat back pad [RH]
33. Rear seat belt center cover

Components (2)

(Rear Seat Cushion Assembly)

1. Rear seat cushion cover
2. Rear seat cushion heater
3. Rear seat cushion pad
4. Heater ECU unit

    Rear Seat
    ...

    Rear Seat Assembly Component Location
    1. Rear seat back assembly [LH] 2. Rear seat back assembly [RH] 3. Rear seat cushion assembly ...

    See also:

    Windshield defrosting and defogging
    WARNING - Windshield heating Do not use the  or  position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the wi ...

    Transaxle Oil Temperature Sensor. Removal
    1. Change the shift lever to "N" range. 2. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body&quo ...

    Brake Switch. Adjustment
    Brake switch clearance adjustment If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the brake swi ...