Kia Soul: Components
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / BCM (Body Control Module) / Components
Connector Pin Information
No. |
Connector A (24 pin) |
Connector B (20 pin) |
Connector C (26 pin) |
Connector D (16 pin) |
1 |
Battery (+) |
LIN (PAS, RPAS) |
Washer motor power |
- |
2 |
IGN 1 |
Front deicer relay |
Front washer motor |
- |
3 |
IGN 2 |
LS CAN high |
Head lamp washer relay |
Sunroof open switch |
4 |
Brake switch |
LS CAN low |
Mirror unfold relay |
Mirror unfold switch |
5 |
Wiper mist switch |
Mood lamp unlock state |
DRL lamp LH |
Mirror fold switch |
6 |
Crash unlock input (PWM) |
Horn relay |
DRL lamp RH |
Head lamp passing switch |
7 |
- |
RPAS buzzer |
Room lamp |
RPAS OFF switch |
8 |
Key IN switch |
HS CAN low |
Key solenoid |
Key interlock switch |
9 |
Wiper washer switch |
HS CAN high |
- |
Auto ligth switch |
10 |
Wiper INT switch |
Ground (Auot light) |
- |
Defogger switch |
11 |
Wiper low switch |
Auto light signal |
Assistant seat belt indicator |
Rear fog switch |
12 |
Rear washer switch |
Auto light power |
Wiper low relay |
Head lamp high switch |
13 |
ACC |
Safety power window enable high |
RPAS switch indicator |
Head lamp low switch |
14 |
Wiper high switch |
- |
DRL lamp power |
- |
15 |
Front fog lamp switch |
ATM solenoid |
Rear washer motor |
- |
16 |
Rear wiper switch |
Rear fog relay |
Mirror fold relay |
- |
17 |
Rear INT switch |
Key hole illumination lamp |
MTS Tx |
|
18 |
- |
- |
- |
|
19 |
- |
- |
Head lamp low signal |
|
20 |
- |
Ground (Power) |
AV tail |
|
21 |
Tail switch |
|
Wiper high relay |
|
22 |
Wiper INT volume |
Rear right seat belt indicator |
||
23 |
- |
Rear center seat belt indicator |
||
24 |
Ground (Signal) |
Rear left seat belt indicator |
||
25 |
|
- |
||
26 |
Ground (Power) |
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-30В° ...
Description
BCM CAN Communication
Function
Function
Description
Timer
Defroster
When IGN ON, Rear Heater Control Function
...
See also:
Starter Inspection
Starter Solenoid Inspection
1.
Disconnect the lead wire from the M-terminal of solenoid switch.
2.
Connect the battery as shown. If ...
Air bag warning label
Air bag warning labels, some required by the U.S. National Highway Traffic Safety
Administration (NHTSA), are attached to alert the driver and passengers of potential
risks of the air bag syst ...
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
...