•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Lower the steering wheel.
|
2. |
Using a screwdriver or remover, remove the cluster fascia panel
(A).

|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
1. Cluster fascia panel
...
1. Center fascia panel
...
See also:
Interior
Interior A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Interior B
* These dimensions indicated in this f ...
Compession Pressure Inspection
If the there is lack of power, excessive oil consumption or poor
fuel economy, measure the compression pressure.
...
Front Seat Assembly Replacement
1.
Loosen the front seat assembly mounting bolts (A).
Tightening torque :
34.3 ~ 53.9N.m (3.5 ~ 5.5kgf.m, 25.3 ~ 39.8lb-ft)
...