Kia Soul: Brake Switch. Adjustment
Brake switch clearance adjustment |
If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1. |
Disconnect the brake switch connector (A).
|
2. |
Pull the locking plate (A) as indicated by the arrow.
|
3. |
Turn brake switch 45° counterclockwise and remove it.
|
4. |
Fix the brake pedal arm and insert fully the brake switch as hiding
contact part.
|
5. |
After inserting, turn the brake switch 45° clockwise, and then
assemble locking plate by pushing.
|
6. |
Confirm the gap between brake switch and bracket.
|
7. |
Connect the brake switch connector (A).
|
Brake Switch. Installation
1.
Fix the brake pedal arm and insert fully the brake switch as hiding
contact part.
2.
After inserting, turn the brake switch 45° ...
Front Disc Brake. Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
See also:
Battery replacement
A transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gently ...
Highway driving
Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures
will result in overheating and possible failure of the tires.
Avoid using worn or damaged tires which may r ...
Luggage room lamp
The luggage room lamp comes on when the tailgate is opened.
The lamp comes on as long as the tailgate is open. To prevent unnecessary charging
system drain, close the tailgate securely after us ...