Kia Soul: Brake Pedal. Removal - Brake System - Brake SystemKia Soul: Brake Pedal. Removal

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Brake Pedal. Removal

1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Disconnect the stop lamp switch connector (A).

4.
Remove the stop lamp switch.
(Refer to Brake System - "Stop lamp switch")
5.
Remove the brake pedal member mounting bolt (A).

6.
Remove the snap pin (A) and clevis pin (B).

7.
Remove the brake pedal member assembly mounting nuts and then remove the brake pedal assembly.

    Brake Pedal. Components
    1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Return spring 5. Bolt 6. Brake pedal arm 7. Brake pedal pad ...

    Brake Pedal. Inspection
    1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...

    See also:

    Special Service Tools
    Special Service Tools Tool Name / NumberIllustrationDescriptionStrut spring compressor09546-26000Compression of coil springBall joint puller09568-34000Remove the ball joint from front axle ...

    Thermostat Installation
    1. Place the thermostat in the block. Install the thermostat (B) with the jiggle valve upward. 2. Install the water inlet fitting (A). ...

    Alternator Circuit Diagram
       • COM signal - When controlling the voltage generated, the ECM sends the target ...