Kia Soul: Auto Head Lamp Leveling Unit Description
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Description
According to driving environment and loading state of vehicle, head
lamp lighting direction is changed to keep the driver's visibility range
and to protect the driver's vision from glare, aiming at safety driving.
Sensor integrated ECU mounting on the rear center arm drives the actuator
mounting on the head lamp since sensing the input signal following the vehicle's
statically changes.
Head lamp beam is automatically operated by chassis tilt.
Auto Head Lamp Leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Sensor angle change.
...
See also:
Components and Components Location
Components (1)
[General Type]
1. Roof trim
2. Sunvisor [LH]
3. Sunvisor [RH]
Components (2)
[Panorama sunroof Type]
1. Roof ...
Alternator Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical ...
Auto stop
Type A
Type B
To stop the engine in idle stop mode
Stop the vehicle completely by pressing the brake pedal.
You must reach a speed of at least 5 mph (8 km/h) since last idle stop.
The engine ...