Kia Soul: Antenna Inspection
Antenna Cable
1. |
Remove the antenna jack from the audio unit and antenna.
|
2. |
Check for continuity between the center poles of antenna cable.
|
3. |
Check for continuity between the outer poles of antenna cable.
There should be continuity.
|
4. |
If there is no continuity, replace the antenna cable.
|
5. |
Check for continuity between the center pole (A) and outer pole
(B) of antenna cable. There should be no continuity.
|
6. |
If there is continuity, replace the antenna cable.
|
Antenna Removal
1. Disconnect the negative (-) battery terminal. 2. Disconnect the roof antenna connectors (A). 3. Disc ...See also:
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be use ...
Starter Installation
1.
Install in the reverse order of removal.
Starter mounting bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...
Input Speed Sensor. Description
Input speed sensor is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor provid ...