Kia Soul: Accelerator Position Sensor (APS). Specifications
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS). Specifications
Specification
Accelerator Position |
Output Voltage (V)
[Vref = 5V] |
|
APS1 |
APS2 |
|
C.T |
0.7 ~ 0.8 |
0.28 ~ 0.48 |
W.O.T |
3.85 ~ 4.35 |
1.8 ~ 2.3 |
Accelerator Position Sensor (APS). Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important senso ...
Accelerator Position Sensor (APS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
See also:
Radiator Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air duct (A).
3.
Separate the filler neck (A ...
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, turn the power on GDS.
...
Adjustment
Clutch Release Cylinder Air Bleeding
Procedure
•
Use the specified fluid. Av ...