Kia Soul: Wheel Repair procedures
Kia Soul EV (PS EV) 2015-2020 Service Manual / Suspension System / Tires/Wheels / Wheel Repair procedures
| Hub nut tightening sequence |
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) |
When using an impact gun, final tightening torque should be checked using a torque wrench. |
Run out inspection
| 1. |
Jack up the vehicle. |
| 2. |
Measure the wheel Run-out by using a dial indicator as illustration below.
|
| 3. |
If measured value exceeds the standard value, replace the wheel.
|
Tire Repair procedures
Tire Wear
1.
Measure the tread depth of the tires.
Tread depth [limit] : 1.6 mm (0.0630 in.)
2.
If the remaining tread depth (A) is less than the limit, replace the tire.
&nb ...
Alignment Repair procedures
Front wheel alignment
When using a commercially available computerized wheel
alignment equipment to inspect the front wheel alignment, always
position the vehicle o ...
See also:
Heater & A/C Control Unit (FATC) Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display panel flickers three times every 0.5 second,
...
Scan
While song (file) is playing
key
Shortly pressing the key : Scans all songs from the next song for 10 seconds
each.
❈ Press the
key again to turn off.
❈ The SCAN ...
Troubleshooting
Symptom
Suspected Area
Remedy
Clutch grabs/chatters
Engine mounting (Loose)
Tighten the Engine mounting.
Clutch disc assembly (Excessive r ...