Kia Soul: Water pump Removal - Cooling System - Engine Mechanical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Water pump Removal

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Water pump Removal

1.
Drain the coolant.
(Refer to Cooling System - "Coolant")
2.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
3.
Remove the water pump pulley(A).

Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

4.
Remove the water pump(A).

    Water pump Components
    1. Gasket 2. Water pump 3. Water pump pulley ...

    Water pump Inspection
    1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. 2. Check the bearing for damage, abnorma ...

    See also:

    Good braking practices
    WARNING Whenever you leave or park your vehicle, always set the parking brake as far as possible and shift the vehicle to 1st (First) gear or R (Reverse) for manual transaxle, or P (Park) fo ...

    Inner panel fuse replacement
    1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. WARNING Be careful not to hurt your hands when a fuse is replaced due to narrow space. 3. Pull the sus ...

    Yaw-rate and G Sensor. Description
    The yaw rate and G sensor is included inside the air bag control module (SRSCM). When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate elec ...