Fault item
| Symptom
| Check point
| Related parts
|
Display
| OLED-LCD NOT displaying
|
1) |
Check the connection between connectors |
2) |
Check the Battery (+), Ignition and Ground wiring |
| Connectors, Wiring, Fuse and Cluster
|
Airbag Warning indicator
| Airbag warning indicator NOT light
|
1) |
Check the Airbag (+) signal (Connector) |
2) |
Check the C-CAN signal |
3) |
Check the connection stuts of FPC |
| ACU connector, Wiring, Fuse and Cluster
|
Mode change
| Trip mode malfunction
|
1) |
Check the switch input terminal (Connector) |
2) |
Chech the signal input (Open or short) |
3) |
Check the mode change of cluster |
| Switch connector, Wiring and Cluster
|
Illumination
| Illumination NOT changing
|
1) |
Check rheostat input signal to connector |
2) |
Check Illumination (-) and Detent signal output |
3) |
Check Tail (+) signal input |
| Switch connector, Wiring and Cluster
|
Cluster Warning sound
| No cluster warning sound
|
1) |
Check the connector of speaker output terminal |
2) |
Check the installed speaker on the vehicle |
| Switch connector, Wiring and Cluster
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel.
(Refer to Body - "Cluster Fascia Panel")
3.
Remove the cluster (A) after removing screws.
...
See also:
Fuse/relay panel description
Inner fuse panel
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
Engine compartment fuse panel
Engine 1.6
Engine 2. ...
Cool box (if equipped)
You can keep beverage cans or other items cool in the glove box.
1. Turn on the air conditioning.
2. Slide the open/close lever of the vent installed in the glove box to the open
position.
3. ...
On-board Refueling Vapor Recovery (ORVR) valve Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump&qu ...