Kia Soul: Troubleshooting - Manual Transaxle SystemKia Soul: Troubleshooting

Kia Soul 2014-2019 PS Service Manual / Manual Transaxle System / Troubleshooting

Symptom
Suspected Area
Remedy
Abnormal noise
Oil level (Low)
To adding oil after inspect the parts (Oil seal, Drain plug, filler plug).
Oil (Wrong)
Replace the oil.
Synchronizer ring (Worn or damaged)
Replace the synchronizer ring.
Gear (Worn or damaged)
Replace the gear.
Bearing (Worn or damaged)
Replace the bearing.
Oil leak
Oil level (High)
Inspect the oil level.
Gasket (Damaged)
Replace the gasket.
Oil seal (Worn or damaged)
Replace the oil seal.
Hard shifting or impossible to shift
Oil (Wrong)
Replace the oil.
Clutch (Dragging)
Inspect the clutch parts (Release fork & bearing, Clutch disc)
Shift fork (Worn)
Replace the shift fork.
Synchronizer ring (Worn or damaged)
Replace the synchronizer ring.
Gear (Worn or damaged)
Replace the gear.
Hub sleeve (Worn or damaged)
Replace the hub sleeve.
Jumps out of gear or shift lever moves excessively
Shift fork (Worn)
Replace the shift fork.
Hub sleeve (Worn or damaged)
Replace the hub sleeve.
Gear (Worn or damaged)
Replace the gear.
Bearing (Worn or damaged)
Replace the bearing.

    Special Service Tools
    Tool Name / Number Illustration Description Engine support fixture (bar) 09200-3N000 Used for holding engine assembly when removing / in ...

    See also:

    Variable Intake Solenoid (VIS) Valve. Description and Operation
    Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ...

    Immobilizer system (if equipped)
    Your vehicle is equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignition key ...

    To decrease the cruising speed
    Follow either of these procedures: Push the SET - switch and hold it. Your vehicle will gradually slow down. Release the switch at the speed you want to maintain. Push the SET - switch and ...