Kia Soul: Transmitter precautions - Keys - Features of your vehicle - Kia Soul 2014-2019 PS Owner ManualKia Soul: Transmitter precautions

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Owner Manual / Features of your vehicle / Keys / Transmitter precautions

✽ NOTICE

The transmitter will not work if any of following occur:

  • The ignition key is in the ignition switch.
  • You exceed the operating distance limit (about 30 feet [10 m]).
  • The battery in the transmitter is weak.
  • Other vehicles or objects may be blocking the signal.
  • The weather is extremely cold.
  • The transmitter is close to a radio transmitter such as a radio substation or an airport which can interfere with normal operation of the transmitter. When the transmitter does not work correctly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Kia dealer.
  • If the transmitter is in close proximity to your mobile phone, the signal could be blocked by your mobile phones normal operational signals. This is especially important when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. Avoid placing the transmitter and your mobile phone in the same pants or jacket pocket and always try to maintain an adequate distance between the two devices.

CAUTION

Keep the transmitter away from water or any liquid. If the keyless entry system is inoperative due to exposure to water or liquids, it will not be covered by your manufacturer’s vehicle warranty.

    Key operations
    Used to start the engine. Used to lock and unlock the doors. To unfold the key, press the release button (1) then the key will unfold automatically. To fold the key, fold the key manuall ...

    Battery replacement
    The transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gen ...

    See also:

    Front Stabilizer Bar Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disco ...

    Heated steering wheel (if equipped)
    With the ignition switch in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate. To turn the heated steering wheel o ...

    Variable Intake Solenoid (VIS) Valve. Description and Operation
    Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ...