Kia Soul: Transaxle Oil Temperature Sensor. Description
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor. Description
Transaxle oil temperature sensor monitors the automatic transaxle fluid's
temperature and conveys the readings to TCM. It is an NTC (Negative Thermal
Coefficient) sensor whose resistance has an inversely proportional relationship
with the temperature level. Data produced by this sensor is used to identify
damper clutch activation and deactivation zones within the low temperature and
high temperature range and to compensate hydraulic pressure levels during gear
changes.
Transaxle Control Module (TCM). Installation
1.
Install in the reverse order of removal.
•
...
Transaxle Oil Temperature Sensor. Specifications
▷ Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]
Resistance (kΩ)
(-40)-40
48.1
(-20)-4.0
15.6
(0)32.0
...
See also:
Description
Ignition timing is controlled by the electronic control ignition timing
system.
The standard reference ignition timing data for the engine operating conditions
are pre-pro grammed in the ...
Fuel Pressure Control Valve. Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve ...
Input Speed Sensor. Specifications
▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8) 0.0472 ~ 0.0709
Output voltage(V)
...