Kia Soul: Transaxle Control Module (TCM). Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Transaxle Control Module (TCM). Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM). Removal

1.
Turn ignition switch OFF.
2.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
3.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
4.
Disconnect the TCM connector (A).
5.
Remove the TCM (B) after removing the bolts and nut.

TCM installation bolt/nut:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Transaxle Control Module (TCM). Inspection
    TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...

    Transaxle Control Module (TCM). Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Component Location
    1. Head lamp leveling unit and sensor 2. Head lamp leveling actuator ...

    Certification label
    The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross ...

    Glove box
    To open the glove box, push the button and the glove box will automatically open. Close the glove box after use. Always keep the glove box closed while the vehicle is in operation. ...