Kia Soul: Torque Converter Control Solenoid Valve (T/CON_VFS). Inspection
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the solenoid valve connector (A).
|
| 3. |
Measure resistance between solenoid valve signal terminal and
ground terminal.
|
| 4. |
Check that the resistance is within the specification.
|
Torque Converter Control Solenoid Valve (T/CON_VFS). Removal
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the drain plug (A) and dr ...
See also:
Push-starting
Vehicles equipped with automatic transaxle lock system cannot be push-started.
Follow the directions in this section for jump-starting.
WARNING
Never tow a vehicle to start it because the sudden su ...
Troubleshooting
Problem
Possible cause
Solution
Not pairing
Bluetooth device of Car is not discoverable mode
Enter Bluetooth pairing (searching) mod ...
Steering Column and Shaft. Disassembly
Key lock assembly
1.
Make a groove on the head of special bolts (A) by a punch.
2.
Loosen the special bolt using a screw driver and ...