Kia Soul: Temperature Control Actuator Replacement - Heater - Heating,Ventilation And Air Conditioning - Kia Soul 2014-2018 PS Service ManualKia Soul: Temperature Control Actuator Replacement

Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Heating,Ventilation And Air Conditioning / Heater / Temperature Control Actuator Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the driver's side shower duct (A) after loosening the screw.

4.
Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.

5.
Install in the reverse order of removal.
    Temperature Control Actuator Inspection
    1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the t ...

    Mode Control Actuator Description
    The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing ...

    See also:

    Occupant detection system
    Type A Type B Your vehicle is equipped with an occupant detection system in the front passenger's seat. The occupant detection system is designed to detect the presence of a properly-seat ...

    Removable towing hook (front) (if equipped)
    1.Remove the towing hook from the tool case. 2.Remove the hole cover pressing the lower part of the cover on the front bumper. 3.Install the towing hook by turning it clockwise into the hole ...

    Exhaust Manifold Removal and Installation
    1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the front and rear oxyg ...