Kia Soul: System setting and activation - Forward Collision-Avoidance Assist (FCA) system (Camera type) - Driving your vehicleKia Soul: System setting and activation

Kia Soul (SK3) 2020-2020 Owners Manual / Driving your vehicle / Forward Collision-Avoidance Assist (FCA) system (Camera type) / System setting and activation

System setting

The driver can activate FCA by placing the ignition switch to the ON position and by selecting:

"User Settings Driver assistance Forward safety"

- If you select "Active assist", FCA system activates. FCA produces warning messages and warning alarms in accordance with the collision risk levels. Also, it controls the brakes in accordance with the collision risk levels.
- If you select "Warning only", FCA system activates and produces only warning alarms in accordance with the collision risk levels. You should control the brake directly because FCA system do not control the brake.
- If you select "Off", FCA system deactivates,

Kia Soul. System setting and activation The warning light illuminates on the LCD display, when you cancel FCA system.

The driver can monitor the FCA ON/OFF status on the LCD display. Also, the warning light illuminates when the ESC (Electronic Stability Control) is turned off. When the warning light remains ON with FCA activated, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

The driver can select the initial warning activation time on the LCD display.

Go to the "User Settings Driver assistance Warning timing Normal/ Later".

The options for the initial Forward Collision Warning includes the following:

- Normal:

When this condition is selected, the initial Forward Collision Warning is activated normally. This setting allows for a nominal amount of distance between the vehicle ahead before the initial warning occurs.

- Later:

When this condition is selected, the initial Forward Collision Warning is activated later than normal. This setting reduces the amount of distance between the vehicle ahead before the initial warning occurs.

Select 'Later' when traffic is light and when driving speed is slow.

If the vehicle in front puts on a burst of speed, the driver can notice the warning alarm is early even though the later option is selected.

Prerequisite for activation

FCA gets ready to be activated, when the Active Assist or Warning Only under the Forward Safety is selected on the LCD display, and when the following prerequisites are satisfied.

- The ESC is activated.
- The driving speed is over 10 km/h. (However, FCA is activated within certain driving speed.)
- When recognizing the vehicle in front. (However, FCA does not activate according to conditions in front and vehicle systems, but it notices only certain warnings.)
- FCA does not operate properly or it only produces a warning alarms in accordance with the driving or vehicle condition.
- If the warning only under the Forward Safety is selected, FCA produces only warning alarms in accordance with the collision risk levels.

WARNING

  • FCA automatically activates upon placing the ignition switch to the ON position. The driver can deactivate FCA by canceling the system setting on the LCD display.
  • FCA automatically deactivates upon canceling the ESC. When the ESC is canceled, the FCA cannot be activated on the LCD display. FCA warning light will illuminate, but it does not indicate a malfunction of the system.
  • Set or cancel FCA with controlling switches on steering wheel after stopping the vehicle in the safe place for your safety.
    Forward Collision-Avoidance Assist (FCA) system (Camera type)
    FCA system is designed to detect and monitor the vehicle ahead in the roadway through camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking. ...

    FCA warning message and system control
    FCA produces warning messages and warning alarms in accordance with the collision risk levels of followings like vehicle’s sudden braking in front or lack of vehicle to vehicle distance. Also, i ...

    See also:

    Occupant Detection System (ODS). Installation
    1. Install in the reverse order of removal. 2. Reconnect the battery negative cable. 3. After installing the OD ...

    Emergency starting
    Connect cables in numerical order and disconnect in reverse order. ...

    Front Strut Assembly Components and Components Location
    Components 1. Strut assembly2. Insulator3. Strut bearing4. Spring upper pad5. Coil spring6. Dust cover7. Bumper rubber8. Spring lower pad ...